BACK TO CATEGORIES
POP
POP

The ADCAMAT POP (Pressure Operated Pump), fabricated in carbon steel (stainless steel on request), is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POP | DN 25 - 80
POP | DN 25 - 80

The ADCAMat POP pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.

MATERIAL

Carbon steel or stainless steel

SIZES

1'' x 1'' a 3" x 2"

DN 25 x 25 a DN 80 x 50

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC

FLOW RATE CAPACITY

Up to 6080 kg/h
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POP | DN 100
POP | DN 100

The ADCAMat POP pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel.

MATERIAL

Carbon steel

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC

FLOW RATE CAPACITY

Up to 29800 kg/h
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POPS-K
POPS-K

The POPS-K packaged pump units can be used to lift or displace hot condensate and other liquids even in hazardous areas. 

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POPS-K (Simplex)
POPS-K (Simplex)

A POPS-K packaged unit is comprised by an ADCAMat pump, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection. Packaged units save time, work and site costs. In addition, they ensure that the installation of the pump is correct in every detail.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POPS-KD (Duplex)
POPS-KD (Duplex)

A POPS-KD (Duplex) packaged unit is comprised by two ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POPS-KT (Triplex)
POPS-KT (Triplex)

A POPS-KT (Triplex) packaged unit is comprised by three ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection. 

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

POP-LC
POP-LC

The ADCAMat POP-LC low capacity pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure.The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.

MATERIAL

Carbon steel and stainless steel

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC

FLOW RATE CAPACITY

Up to 2195 kg/h
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PPT14
PPT14

 

The ADCAMat PPT14 automatic pump trap is especially recommended where stall condition may occur due to poor steam trap condensate discharge capacity, caused by temporary insufficient pressure drop.
The equipment combines the features of a float steam trap and a pressure operated pump, in one single unit.

MATERIAL

Carbon steel and stainless steel

SIZES

11/2” x 1” and 2” x 11/2”
DN 40 x 25 and DN 50 x 40

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PPT-K (Simplex)
PPT-K (Simplex)

The ADCAMat PPT-K packaged pump trap unit is intended for lifting hot condensate in closed loop systems. The unit is comprised by an ADCAMat PPT14 pump trap, a receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection, saving time, work and site costs. In addition, it ensures that the installation of the pump trap is correct in every detail. Two or more units can be connected in parallel to cope with flow rates beyond the capacity of a single unit. 

MATERIAL

Carbon steel and stainless steel

SIZES

DN 40 x 25 and DN 50 x 40

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp or NPT

MAX. OPERATING PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

APST
APST

 

The ADCAMat APST automatic pump trap is especially recommended where stall condition may occur due to poor steam trap condensate discharge capacity, caused by temporary insufficient pressure drop.
The equipment combines the features of a float steam trap and a pressure operated pump, in one single unit.

MATERIAL

Carbon steel and stainless steel

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PPA312
PPA312

The ADCAMat PPA312 pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.

MATERIAL

Carbon steel

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC

FLOW RATE CAPACITY

Up to 7540 kg/h
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PPA14
PPA14

The ADCAMat PPA14 pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.

MATERIAL

Carbon steel

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC

FLOW RATE CAPACITY

Up to 6290 kg/h
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PPO14
PPO14

The ADCAMat PPO14 pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.

MATERIAL

Carbon and stainless steel

CONNECTIONS

Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp

MAX. MOTIVE PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

185 ºC

FLOW RATE CAPACITY

Up to 4000 kg/h
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S16
S16

The S16 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S16S
S16S

MATERIAL

Carbon steel

SIZES

1/2” to 2”

CONNECTIONS

Female threaded ISO 7 Rp or NPT

RATING

PN 16 and PN 40
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S16SS
S16SS

MATERIAL

Stainless steel

SIZES

1/2” to 2”

CONNECTIONS

Female threaded ISO 7 Rp or NPT

RATING

PN 16 and PN 40
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S25
S25

The S25 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S25S | PN16 - PN40
S25S | PN16 - PN40

MATERIAL

Carbon steel body

SIZES

DN 15 to DN 300

CONNECTIONS

Flanged EN PN16 or 40
Flanged ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S25S | PN63
S25S | PN63

MATERIAL

Carbon steel body

SIZES

DN 15 to DN 200

CONNECTIONS

Flanged EN PN 63
Flanged ASME Class 600
Socket weld (SW) ASME

MAX. OPERATING PRESSURE

58 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S25SS
S25SS

MATERIAL

Carbon steel and zinc plated body

SIZES

DN 15 to DN 300

CONNECTIONS

Flanged EN PN16 or PN40
ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S25/S HV / S25/S VH
S25/S HV / S25/S VH

MATERIAL

Stainless steel

SIZES

DN 15 to DN 200

CONNECTIONS

Flanged EN PN16 or PN40
ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SF251/S
SF251/S

The SF251/S series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL

Carbon steel body

SIZES

DN 15 to DN 100

CONNECTIONS

Flanged EN PN16 or PN40
Flanged ASME Class 150 or 300

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SH25
SH25

The SH25/S series horizontal centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL

Carbon steel

SIZES

1/2” to 6” – DN 15 to DN 150

CONNECTIONS

Flanged EN PN 16 or PN 40
Flanged ASME Class 150 or 300

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC

RATING

PN 16 or PN 40
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

S30
S30

The S30 series baffle separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of expansion, impact and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale, are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL

Carbon steel and zinc plated body

SIZES

DN 15 to DN 300

CONNECTIONS

Flanged EN PN16 or PN40
Flanged ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC

RATING

PN16 or PN40
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SC32 / SC132
SC32 / SC132

The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous and may result in an incorrect sample. This device may be used for boiler water analysis and other sampling or cooling applications compatible with the construction materials.

MATERIAL

Stainless steel body and coil

SIZES AND CONNECTIONS

Cooling water inlet/outlet: 1/2” on body (BSP or NPT)
Sample tube inlet/outlet: 8 mm O/D

MAX. OPERATING PRESSURE

20 bar (body)
110 bar (coil)

MAX. ALLOWABLE TEMPERATURE

120 ºC (body)
450 ºC (coil)
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SC32F / SC132F
SC32F / SC132F

The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous and may result in an incorrect water sample. This device may be used for boiler water analysis and other sampling or cooling applications compatible with the construction materials.

MATERIAL

Stainless steel body and coil

SIZES AND CONNECTIONS

Cooling water body inlet 1/2”, outlet 3/4” (BSP or NPT)
Sample tube inlet/outlet: 8 mm O/D

MAX. OPERATING PRESSURE

20 bar (body)
110 bar (coil)

MAX. ALLOWABLE TEMPERATURE

120 ºC (body)
450 ºC (coil)
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SC32B / SC132B
SC32B / SC132B

The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous and may result in an incorrect sample. This device may be used for boiler water analysis and other sampling or cooling applications compatible with the construction materials.

MATERIAL

Stainless steel body and coil

SIZES AND CONNECTIONS

Cooling water body inlet 1/2”, outlet 1/2” (BSP or NPT)
Sample tube inlet/outlet: 8 mm O/D

MAX. OPERATING PRESSURE

20 bar (body)
110 bar (coil)

MAX. ALLOWABLE TEMPERATURE

120 ºC (body)
450 ºC (coil)
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SC332 – SC532
SC332 – SC532

The ADCA sample coolers were specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurised liquid samples, which can be dangerous and may result in an incorrect sample. This device may be used for boiler water analysis and other sampling or cooling applications compatible with the construction materials.

MATERIAL

Stainless steel body and coil

SIZES AND CONNECTIONS

Cooling water inlet/outlet: 1/2” or 3/4'' (BSP or NPT)
Sample tube inlet/outlet: 10 mm O/D

MAX. OPERATING PRESSURE

20 bar (body)
Up to 280 bar (coil)

MAX. ALLOWABLE TEMPERATURE

120 ºC (body)
Up to 550 ºC (coil)
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

DSH
DSH

The ADCA DSH series of direct steam injection humidifiers are designed to ensure highly efficient and moisture free steam injection in air ducts and AHU for humidification purposes. These units are completely manufactured from corrosion resistant stainless steel, and are available as plug and play packaged solutions or alternatively as individual components to be incorporated into humidification systems.

MATERIAL

Stainless steel

SIZES

1/2”, 1” and 11/4”

CONNECTIONS

Female threaded ISO 7 Rp or NPT
Flanged and special connections on request
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SI20
SI20

The ADCAMix SI20 is a series of direct steam injectors designed for low noise heating of still or flowing mediums, inside basins and vessels.

SIZES

3/4”

CONNECTIONS

Female screwed ISO 7/1 Rp

MAX. OPERATING PRESSURE

8,5 bar

MAX. OPERATING TEMPERATURE

180 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SI115
SI115

The ADCAMix SI115 is a series of direct steam injectors designed for rapid heating of still or flowing mediums, inside basins and vessels. Steam enters through the inlet connection, passes along the center of the device and mixes with the cool medium, which is drawn in through radial holes.

MATERIAL

Austenitic stainless steel

SIZES

1/2”

CONNECTIONS

Threaded ISO 7 Rp

MAX. OPERATING PRESSURE

17 bar

MAX. OPERATING TEMPERATURE

95 ºC

RATING

PN 25
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SI125 / SI140
SI125 / SI140

The ADCAMix SI125 and SI140 is a series of direct steam injectors designed for rapid heating of still or flowing mediums, inside basins and vessels. Steam enters through the inlet connection, passes along the center of the device and mixes with the cool medium, which is drawn in through radial holes.

MATERIAL

Austenitic stainless steel

SIZES

1” and 11/2”

CONNECTIONS

Threaded ISO 7 Rp

MAX. OPERATING PRESSURE

17 bar

MAX. OPERATING TEMPERATURE

95 ºC

RATING

PN25
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

MX20
MX20

The ADCAMix MX20 is a series of steam/water mixers designed to provide a cheap and instantaneous source of low pressure hot water, by using existing steam and cold water supplies. The mixer incorporates a safety device, to ensure that live steam cannot be accidentally ejected even if, for some reason, the cold water supply fails. The water temperature at the outlet of the ADCAMix is easily controlled by using water and steam valves fitted at the inlets.

MATERIAL

Stainless steel

SIZES

3/4” x 3/4”

CONNECTIONS

Threaded ISO 7 Rp

MAX. OPERATING PRESSURE

10 bar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SG20
SG20

The SG20 series water-saving guns are especially recommended to be used along with the Adcamix MX20 steam to water mixers. By using this gun, water and energy costs can be considerably reduced and it also contributes to environmental protection, avoiding the use of chemicals in the cleaning process.

SIZES

1/2

MAX. OPERATING PRESSURE

24 bar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

ECRU
ECRU

The ADCAMAT ECRU series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 20 m3/h, or higher on request. The units are composed of a condensate vessel (receiver), a metallic support frame, electric pumps, level controls, valves, prewired control panel and pipework for connections between the different elements of the units.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

ECRUV
ECRUV

The ADCAMat ECRUV series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 4 m³/h. The units are composed of a vertical condensate vessel (receiver), a metallic support frame, electric pump, level controls, valves, prewired control panel and pipework for connections between the different elements of the units.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PWHU
PWHU

The ADCATherm PWHU packaged water heating units are designed for instant hot water heating in a safe and efficient way, using steam as primary fluid. 
Each system is built to meet application and space requirements in a compact skid package, ready for connection into the system, reducing on-site labour and disruption time.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

FRECO
FRECO

The ADCATtherm FRECO – flash steam heat recovery unit – is a skid mounted package unit to facilitate heat recovery from flash steam, condensate or both. The Freco is especially recommended for heating a continuous flow of fluid, such as make-up water to a boiler feedwater system. Non-continuous flow applications may require additional recirculation, relief valves, or other devices, to avoid system damage due to overheating and consequent overpressure.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

STS
STS

The ADCA STS series steam to water shell and tube heat exchangers are shorter and lighter than the alternative shell and tube exchangers manufactured with smooth pipes. The use of extruded low fin tube has the advantage that it can improve the external surface and thermal performance.

MATERIAL

Stainless steel

CONNECTIONS

Flanged or threaded, according to EN or ASME standards

MAX. ALLOWABLE PRESSURE

16 bar

MAX. ALLOWABLE TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

STH
STH

The ADCA ST series steam to water shell and tube heat exchangers are shorter and lighter than the alternative shell and tube exchangers manufactured with smooth pipes. The use of extruded low fin tubes has the advantage that it can improve the external surface and thermal performance.

MATERIAL

Carbon steel and stainless steel

CONNECTIONS

Flanged or threaded, according to EN or ASME standards

MAX. OPERATING PRESSURE

16 bar

MAX. OPERATING TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

STV
STV

The ADCA ST series steam to water shell and tube heat exchangers are shorter and lighter than the alternative shell and tube exchangers manufactured with smooth pipes. The use of extruded low fin tubes has the advantage that it can improve the external surface and thermal performance.

MATERIAL

Carbon and stainless steel

CONNECTIONS

Flanged or threaded, according to EN or ASME standards

MAX. OPERATING PRESSURE

16 bar

MAX. OPERATING TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PAT
PAT

The ADCATherm PAT plate heat exchangers (gasketed and bolted), consist of a variable number of pressed heat transfer plates clamped together between a fixed and a movable pressure plate, all assembled in a metal frame.

MATERIAL

Carbon steel, stainless steel or special alloys

CONNECTIONS

Female threaded ISO 228 or NPT
Flanged EN 1092-1 PN 10 or ASME B16.5 Class 150

MAX. OPERATING PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

Up to 180 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

R SERIES
R SERIES

The ADCA R series steam to water tubular heating coils are shorter and lighter than the alternative tubular heating coils manufactured with smooth pipes. The use of extruded low fin tube has the advantage that it can improve the external surface and thermal performance.

CONNECTIONS

Flanged EN or ASME
Threaded on request

MAX. OPERATING PRESSURE

16 bar

MAX. OPERATING TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

RV
RV

The flash vessel is the main component in any flash recovery system. It can be used in all steam plants where high pressure condensate is reduced to a lower pressure, so that flash steam is formed by reevaporation. This steam can be used in low pressure process or heating equipments.

MATERIAL

Carbon and stainless steel

SIZES

RV06, RV08, RV12, RV16 and RV18

CONNECTIONS

Flanged EN PN16

MAX. OPERATING PRESSURE

16 bar

MAX. OPERATING TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

RVST
RVST

The flash vessel is the main component in any flash recovery system. It can be used in all steam plants where high-pressure condensate is reduced to a lower pressure, so that flash steam is formed by re-evaporation. This steam can be used in a low pressure process or heating equipment.

MATERIAL

Carbon and stainless steel

SIZES

RVST08, RVST12, RVST16, RVST18

CONNECTIONS

Flanged EN PN16

MAX. OPERATING PRESSURE

16 bar

MAX. OPERATING TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

ADG
ADG

The ADCATherm atmospheric semi-deaerators are designed to heat boiler feed water and to reduce oxygen and carbon dioxide (oxygen values in the feed water of less than 1,6 mg/L can be achieved). Remaining oxygen can be completely removed using oxygen-scavenging chemicals. Basically, the complete system consists of a storage vessel, a deaeration head section and a vent.

CONNECTIONS

Flanged EN or ASME
Sockets BSP or NPT

MAX. ALLOWABLE PRESSURE

0,5 bar

MAX. ALLOWABLE TEMPERATURE

120 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

TDG
TDG

The TDG series tray-type thermal deaerators are designed to heat boiler feed water and reduce oxygen and carbon dioxide levels (oxygen levels in the feed water of less than 0,02 mg/l - 0,02 ppm can be achieved). Remaining oxygen can be completely removed using oxygen-scavenging chemicals. Basically, the complete system consists of a storage vessel, a deaeration section and a vent.

MATERIAL

Carbon and stainless steel

CONNECTIONS

Flanges EN or ASME
Sockets BSP or NPT
Different connections on request

MAX. ALLOWABLE PRESSURE

0,5 bar

MAX. ALLOWABLE TEMPERATURE

120 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

FCD
FCD

The ADCA flash condensing heads are designed to promote energy efficiency on new or existing systems. Mixing the flash steam with the boiler make-up water allows the energy within the flash steam to be fully absorbed into the water and therefore reduces energy waste that normally occurs from the discharge of flash steam through a vent.

MATERIAL

Stainless steel

CONNECTIONS

Threaded ISO 7 Rp
Flanged EN or ASME
Different connections on request

MAX. ALLOWABLE PRESSURE

0,5 bar

MAX. ALLOWABLE TEMPERATURE

120 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BEX
BEX

The ADCA BEX series blowdown expansion and cooling units are used in modern boiler houses to cool hot waste water and steam boiler blowdown before discharging them into a pit or drain.

MATERIAL

Carbon steel

CONNECTIONS

Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150

MAX. ALLOWABLE PRESSURE

0,5 bar

MAX. ALLOWABLE TEMPERATURE

120 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BV
BV

The ADCA BV series blowdown vessels are used in modern boiler houses to cool hot waste water and steam boiler blowdown before discharging them into a pit or drain. If flash steam can not be recovered or discharged to the atmosphere, an optional condensing water spray system can be supplied. It is fitted into the top of the unit and can be controlled by a thermostat.

MATERIAL

Carbon steel or stainless steel

CONNECTIONS

Flanged EN PN16 or ASME

MAX. ALLOWABLE PRESSURE

7 bar

MAX. ALLOWABLE TEMPERATURE

180 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BFT
BFT

The BFT boiler feed tank is one of the most important devices in a boiler room. Its main function is to store the make-up water and condensate, assuring a reserve of treated water to supply to the steam boilers. The make-up water has to be softened to prevent scale formation on the boiler and the oxygen also has to be removed, so that corrosion in the boiler and steam system is avoided.

MATERIAL

Carbon and stainless steel

CONNECTIONS

Flanged EN or ASME
ISO or NPT Threaded sockets

MAX. ALLOWABLE PRESSURE

0,5 bar

MAX. ALLOWABLE TEMPERATURE

120 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

AS
AS

The AS series centrifugal air and dirt separators were designed to be used in the flow line of a hydronic heater or cooling system. The operation is based on the principle of centrifugal force, instead of relying on low-velocity separation, offering the advantage of efficient separation in a smaller vessel. The ADCA AS units provides maximum separation efficiency while minimizing space requirements.

MATERIAL

Carbon, zinc plated and stainless steel body

SIZES

11/4” to 2” – DN 32 to DN 300

CONNECTIONS

Threaded ISO 7 Rp
Flanged EN PN16 or PN40
Flanged ASME Class 150 or 300
Special flanges upon request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

MLI
MLI

The MLI series of bypass type magnetic level indicators were designed for continuous level indication and/or control in ADCA ECRU units and other special SKID mounted packages.  
The indicators can be equipped with multiple MSB reed switches for alarm purposes or a side mounted level transmitter for continuous level monitoring.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

HCC
HCC

The HCC is a cooling device that allows the mixing of hot condensate with a lower temperature condensate, avoiding hammering. Condensate discharge from higher pressure lines (drip points, for instance) is often connected to low-pressure condensate lines, with lower temperatures. This sudden pressure drop will convert the sensible heat difference between the two fluid conditions into latent heat, generating flash steam.

MATERIAL

Carbon and stainless steel

CONNECTIONS

Flanged EN PN16 or PN40
Flanged ASME Class 150 or 300
Others on request

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

300 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

EH
EH

The EH series exhaust heads were designed to protect personnel from injury and exterior of buildings from harmful effects of steam ejection to atmosphere. The head is fitted at the end of a vertical exhaust pipe and effectively retains the moisture separated from the steam for draining.

MATERIAL

Carbon, zinc plated and stainless steel body

SIZES

1” to 10” – DN 25 to DN 250

CONNECTIONS

Flanged EN PN16 or ASME Class 150

MAX. ALLOWABLE PRESSURE

0,5 bar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

LIPO
LIPO

The LIPO series of condensate lifting pots are designed for installation in steam and condensate systems. They are particularly used in condensate lines where condensate must be transported without causing water hammers and noise and lifted to elevated condensate mains.

MATERIAL

Carbon and stainless steel

SIZES

DN 15 to DN 100

CONNECTIONS

Flanged EN or ASME

MAX. ALLOWABLE PRESSURE

18 bar

MAX. ALLOWABLE TEMPERATURE

250 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

MAS
MAS

The MAS series steam distribution manifolds are essentially designed to allow the placement of steam supply valves in a single location, reducing costs and providing easy control of different steam lines. The drain connection, with an automatic steam trap installed, discharges any condensate formed, thus providing high-quality dry steam.

SIZES

DN 100 to DN 300

CONNECTIONS

Flanged EN PN 16 or PN 40
Flanged ASME Class 150 or 300
Threaded ISO 7 Rp or NPT on request
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PLUG & PLAY SKIDS

_

Our company name features ‘engineering’ for a reason. We genuinely do have the knowledge, expertise and facilities in-house to develop tailor-made solutions that will improve our customer’s processes. This, of course, deeply in sync with our vast range of standard equipment.
Need Help

We're here to help and answer any questions you might have.